Written by
CIVITEC Engineering
Risers, corridor racks and plant skids are the strongest candidates.
Offsite manufacturing is not automatically faster. It pays back where work is repetitive, congested or hard to reach on site.
Risers, corridor racks and plant skids are the strongest candidates. Bespoke, low-repeat areas often cost more to prefabricate than to build in place.
The decision should be made at design stage, with the installer, using real site constraints — not as a late value-engineering exercise.
Sample article — replace with your own content.
Engineering knowledge
7 min
Lower-carbon concrete without the schedule penalty
What we have learned specifying blended-cement mixes on fast-track frames — strength gain, curing and the conversations to have early.
Project updates
5 min
From drawing set to site: closing the RFI gap
A practical review cadence that cut open RFIs at handover on a sample programme.
Technical article
9 min
Designing steel connections for erection, not just for load
Why the erector should sit in the connection-design review — and what changes when they do.
Next article
